Description
- DELIVERY
JC100 Multi Carburettor Sausage Filter
This listing is for the JC100/S/40 (40mm internal height filter only)
These robust filters are the standard fit for most competition cars around the world.
The sausage version is used where the standard box shaped filter will not fit the available space
| Part No. | A (Internal height) | B (Width) | C (Length) | D (Overall height) |
|---|---|---|---|---|
| JC100/S/25 | 25 | 142 | 608 | 50 |
| JC100/S/40 | 40 | 142 | 608 | 65 |
| JC100/S/65 | 65 | 142 | 608 | 90 |
| JC100/S/100 | 100 | 142 | 608 | 125 |
The ITG Megaflow JC100 Multi Carburettor Air Filter range is engineered to deliver exceptional filtration and airflow for multi-carburettor engine setups.
Trusted by leading motorsport teams worldwide in both racing and rally disciplines, ITG air filters are also the preferred choice of many of the UK’s most respected engine builders. Designed to maximise performance without compromising engine protection, ITG filters have earned a reputation for quality and reliability in demanding competition environments.
Handcrafted in the UK, the Megaflow JC100 filters are primarily intended for motorsport use. They mount directly to compatible base plates (sold separately), providing excellent airflow, reliable engine protection, and enhanced safety. Each filter incorporates ITG’s advanced three-layer Trifoam construction. The two outer foam layers effectively capture airborne contaminants, while the inner self-extinguishing foam layer helps minimise filter damage in the event of carburettor blowback.
The distinctive ITG Red-Band mounting system securely fastens the filter to the base plate while maintaining structural rigidity. Manufactured from lightweight, fibre-reinforced nylon, the Red-Band is designed to create an effective seal with the base plate, reducing the risk of induction air leaks. Available in both single-band (sausage-style filters) and dual-band (flat-top filters) configurations, the Red-Band has become a hallmark of ITG’s premium quality and performance.
For the sausage-style filters, the foam element is supported by a hand-formed wire mesh that extends across the entire filter, including the end sections. This construction helps the filter retain its shape over time, ensuring consistent airflow, effective filtration, and a long-lasting appearance.
For optimum performance, ITG recommends maintaining a clearance of approximately 13mm (½”) between the carburettor inlet and the inside of the filter. Where ram pipes or trumpets are fitted, a clearance of around 19mm is recommended. These dimensions provide adequate airflow while accommodating installations where available space is limited.
The JC100 range is specifically designed for multi-carburettor applications and is available in a flat-top design with a choice of internal heights to suit different installations: 25mm, 40mm, 65mm, and 100mm.
Filter Dimensions (excluding mounting lugs):
- Length: 608mm
- Width: 142mm
- Internal Height: 25mm, 40mm, 65mm, or 100mm
Please Note: ITG air filters must be pre-oiled before installation.
DELIVERY Faulkner Race Spring – 10″ Length – 2.25 Inch ID – 200lb Stilo ST6 KRT Helmet FIA 8878-2024 Snell K2025 – Composite Lifeline 6-Point 2″ Straps Harness – Woodcote Apex
Reviews
There are no reviews yet.